How to Clean Patio Slabs Without Damaging Them

    By Mike, MRL Gardening & Landscaping. Published .

    The safest way to clean patio slabs is to sweep them, scrub them with warm water, a little washing-up liquid and a stiff brush, then rinse with clean water. For green algae and stubborn stains, use a patio cleaner made for your type of slab, and be careful with a pressure washer, which can damage softer stone and blast out the joints.

    In a wet, mild climate like North Devon's, patios go green faster than most. Here is how to clean yours without causing new problems.

    Check what your patio is made of

    Different slabs need different treatment, so work out what you have first.

    • Porcelain is dense and hard wearing. Manufacturers recommend a cleaner made for porcelain.
    • Sandstone and other natural stone are softer and more porous. They mark more easily and can be damaged by harsh chemicals or high pressure.
    • Limestone can be damaged by acid-based cleaners, including vinegar. Check the label before using any product on it.
    • Concrete slabs are the most forgiving, but the surface texture can still wear with heavy pressure washing.

    If you are not sure what your slabs are, the original installer or a builders' merchant can often tell you from a photo. Whatever you use, try it on a small, out-of-the-way area first.

    Step by step: a basic clean

    • Move furniture and pots off the patio.
    • Sweep thoroughly and pull out weeds and moss from the joints.
    • Wet the surface with clean water.
    • Scrub with warm water and a few drops of washing-up liquid, using a stiff brush. Avoid wire brushes on natural stone.
    • Rinse well with clean water so no residue is left.
    • Let it dry fully before putting furniture back.

    For most patios that are just dirty, this is all you need.

    Green algae and moss

    Green slime and moss grow where a patio stays damp, especially in shade. As well as looking tired, it makes the surface slippery.

    A patio cleaner designed for algae will shift it more easily than scrubbing alone. Follow the instructions, keep it off lawns and planting, and rinse thoroughly. Avoid chlorine bleach. It can discolour some slabs and damage plants at the edges of the patio.

    If one part of the patio is always the first to go green, look at what keeps it wet. An overhanging shrub, a leaking gutter or water running off a bank are common causes, and fixing them saves cleaning as often.

    Black spots

    Small black spots that will not scrub off are usually lichen rather than dirt. Lichen grips the surface of the slab, so washing and pressure washing rarely remove it.

    Specialist lichen treatments are available. They tend to work slowly, often over several weeks as the weather breaks the lichen down. Check the product is suitable for your type of paving before you use it.

    Should you use a pressure washer?

    A pressure washer is quick, but it can do real damage. High pressure can etch the surface of sandstone and limestone, and it can blast mortar or jointing compound out of the gaps between slabs. Once the joints are open, water gets under the slabs and weeds move in.

    If you do use one, choose a low setting and a wide fan nozzle, keep the lance at a distance, and work at an angle across the slabs rather than straight down into the joints. Holding the lance too close can also leave a striped, patchy finish on natural stone. Check the joints afterwards, and refill any that have opened up.

    Keeping it clean for longer

    • Sweep regularly and do not let leaves sit on the surface.
    • Cut back overhanging shrubs so more light and air reach the patio.
    • Pull weeds from the joints before they get established.
    • Deal with puddles. If water sits in the same place after rain, the patio may not have enough fall.

    Need a hand?

    If your patio holds water, rocks underfoot or the joints have failed, cleaning will not fix it. Mike can tell you whether it needs relaying, and our patios and decking page explains how we build them. For regular upkeep, see garden maintenance. We work across Braunton, Barnstaple and the rest of North Devon. Call or text 07881 207275.

    Related services: Garden Maintenance, Patios & Decking.

    Quick answers

    Sweep, scrub with warm water, a little washing-up liquid and a stiff brush, then rinse with clean water. Use a patio cleaner suited to your slabs for algae or stubborn stains.

    It is best avoided. Chlorine bleach can discolour some slabs and damage plants and lawn edges around the patio. Use a patio cleaner made for the job.

    It can. High pressure can etch softer stone such as sandstone and limestone and blast out the joints. If you use one, keep the pressure low and avoid aiming into the joints.

    Free quote, no obligation

    Call or text Mike on 07881 207275, or send a few details and he will come back to you personally.